Retro, industrial, steampunk, one of a kind artwork & more!

Posts in Category » 3D Art

Mixed Media Altered Clock with Wings and Heart

By

Jun 19, 2017 3D Art, Altered Art, Finnabair, Mixed Media, Steampunk, Tutorials 4 Comments

Wings & Heart Mixed Media Altered Clock!

I had so much fun making my previous altered clocks that I had to make some more. I was asked to make a custom design for a customer with a steampunk/gothic look. Her favourite colour was purple and so she had to have some in the clock. No problem, as my fav colour is purple too – yummm! I plan to enter this one into Sandee & amelie’s Steampunk Challenge, as I think it fits with their design challenge. The vintage market we were so busy getting prepared for is over, so I have a bit more time to play around with some new ideas (coming soon!).

For this clock I used an old clock from the vintage thrift store as my base and my inspiration again comes from Finnabair.  I just finished taking some classes with her when she was here in Canada in April, and I loved all of her new waxes (so I had to buy all of them). I used Antique Brilliance Ruby and Amethyst on this clock.

I distressed and painted the metal clocks with paints from Finnabair’s Prima line and added texture on the surface. Then I glued on an assortment of embellishments (wings, gears, flowers, flaming heart, etc.). With the clock being so deep, I knew I had to make layers to bring the centre piece forward. I adhered layers of the gears using jumbo foam dots that I painted black to hide. Be sure to click on the images below to enlarge them.

                    

I was pleased with how they turned out  – Hope you enjoyed!       Val

P.S. As for organizing my craft room – I did manage to get rid of  lots of supplies I wasn’t using at a garage sale – best they go to a better home than I could provide LOL. Now I just have to make sure I don’t just fill the space with more “stuff” (don’t hold your breath).


Mixed Media Altered Clock with Gears

By

Apr 4, 2017 3D Art, Altered Art, Finnabair, Mixed Media, Steampunk Comments are off

Mixed Media Altered Clock!

Hi there, I just finished another project that I plan to enter into Sandee & amelie’s Steampunk Challenge. I continue to gather great inspiration from their blog!  We have been so busy these last few months working to make things for our Vintage Market (see events page), these pieces included. I used old clocks from the vintage thrift store as my base. My inspiration comes from Finnabair as I am really drawn to her style. It just so happens that I took some classes with her recently. It was a great class – but more on that later.
I distressed and painted the metal clocks with paints from Finnabair’s Prima line and added texture on the surface. Then I glued on an assortment of embellishments (gears, button, butterflies etc.). With the clock being so deep, I knew I had to make layers to bring the centre piece forward. I adhered layers of the gears and trinkets using jumbo foam dots that I painted black to hide. Be sure to click on the images below to enlarge them.

I was pleased with how they turned out and have already sold one – Hope you enjoyed!       Val

P.S. I know I was going to take on the task of organizing my craft room – but that will now officially be “spring cleaning”. Stay tuned.


Steampunk Altered Phone Frame

By

Jun 11, 2016 3D Art, Altered Art, Mixed Media, Steampunk, Tutorials 4 Comments

Prima Steampunk Phone Frame made into altered art!

Hi there, I just finished another project that I plan to enter into Sandee & amelie’s Steampunk Challenge. Love their blog – all things steampunk, industrial, and vintage – and great inspiration from all the other entrants!  We have been so busy these last few months working to make things for our Vintage Market, so it has been nice to be able to get back making art to share. This distressed metal phone from Finnibair/Prima Marketing was delicious all on its own. So I didn’t want to alter it too much and hide the phone. I wanted to have one of Prima’s Flower Cherubs to be the focal point. With the phone being so deep, I knew I had to make layers to bring the centre piece forward. So I started with a piece of wood (5×5 and 3/8″ thick). First I coated it with gesso, then I spread modeling paste around the edges and sprinkled glass beads into the modeling paste before it dried.  I was happy with the texture it provided.  Once dried, it was painted with various Golden Acrylic Paint (Burnt Umber, Paynes Gray, Burnt Sienna, Raw Sienna, Red Oxide).  I set that aside to dry while I worked on the Cherub piece. Be sure to click on the images to enlarge them..

altered phone 2  altered phone 3  altered phone 4

For the Cherub centre piece, I covered a 4×4 art board with gesso, before decoupaging tissue paper with text onto it (Tim Holtz Tissue Wrap – Terminology).  I added texture to the edges of the art board using Golden Fine Pumice Gel, and Fiber Paste. After it dried, I high lighted the textured areas and some of the edges with Lumiere Metallic Paint (Bronze, Rust, True Gold). The white Cherub Flower needed a touch of colour, so I painted the edges with Finnibair’s Steampunk Copper acrylic paint. The cherub was first attached to a piece of foam board to raise it up off the art board to give it even more depth.  I also glued a piece of foam board to the back of the art board so that when it was glued to the 5×5 wood background piece, it would be raised up even more. This also allowed for the metal embellishments to poke out from the different layers.

altered phone 5  altered phone 6

I used Finnibair’s new Prima Mechanicals as embellishments around and tucked under the Cherub piece. I had this old, rusty 10 gauge wire that I wrapped around the Cherub piece before attaching it to the 5×5 board.

altered phone 6 altered phone 13 altered phone 8

Before attaching the entire piece to the back of the phone (I had to take the back off the phone to do this), I realized that the piece still wasn’t brought forward as much as I wanted. So I glued another piece of foam board onto the back the the 5×5 piece before gluing it onto the phone back and inserting it back into the phone.

altered phone 9 altered phone 10 altered phone 12

I was pleased with how it turned out – Hope you enjoyed!       Val


Steampunk Altered Sewing Machine Frame

By

Jun 8, 2016 3D Art, Altered Art, Mixed Media, Steampunk, Vintage 4 Comments

A 1898 Antique Sewing Machine Frame made into altered art!

Today I am entering this project into Sandee & amelie’s Steampunk Challenge .  I like how the Steampunk assemblage really works well with the antique wood frame.  The frame is from a 1898 New Williams sewing machine.  I love antique sewing machines – they look like Steampunk artwork in and of themselves.  Tissue with vintage styled text on it was decoupaged to an art board to create the background. As for the dress form image, it is card stock from the Timekeeper set from Marion Smith Designs; which is distressed and attached to black card stock to bring out the image. The gears, wheels, and butterfly are from Finnibair’s new mechanical release (love these so much!!!).  A few more metal pieces to decorate the corners (they actually hide the holes where the sewing machine was fastened), and a vintage style key finishs off the piece.

Steampink sewing frame (1)      Steampink sewing frame (3)

Hope you enjoyed!       Val


Scrabble Board Sign

By

May 5, 2016 3D Art, Altered Art Comments are off

Did I make any typos?

I love scrabble tiles! So, I am always on the look out for them when I go on our junking trips.  I have collected a LOT of them over the past while. Last year I saw this fantastic idea where they filled a scrabble board with words of encouragement. We saw it at a local vintage market, and I now wish I could thank the vendor for her inspiration. Like I said, inspired by the idea, my hubby and I sat down one night for a game of scrabble – but not just any old game. We decided to fill the scrabble board with as many “vintage” words that describes our point of view and we made it into a sign to use at our markets. Hope it gives inspiration to others as well.

Hope you enjoyed!       Val


Heart with Wings

By

Nov 2, 2015 3D Art, Altered Art, Industrial, Mixed Media, Steampunk, Tutorials 4 Comments

Hello again!

It’s been a while since I have posted. I have been busy creating for an upcoming Vintage Market. It will be our first adventure – should be fun. Reinventing lots of vintage and rusty treasures. Here is an art piece I made from an old picture frame. I call it Heart with Wings.  I have entered this piece into SanDee & amelie’s latest Steampunk Challenge.

I started with a salvaged frame that had seen better days.  I liked it because it was one solid wood piece, with a raised centre where an old print had been glued on.  After striping the print off the centre, I painted the outer frame with chalk paint, sanding the surface back to show some of the wood before I waxed it to seal it, (being careful not to get wax where I was going to glued down the music sheet in the centre raised part).

Years back, during one of our “junking” trips, I found some awesome sheet music that ranged from 1902 – 1938.  I used gel medium to decoupage the sheet music from 1935 onto the centre raised area.  I used Distress Ink to age the edges of the music before gluing it down. Even the song title resonated with me; “I’m in the mood for love”.

Heart - chalk paint Heart - frame detail

Now it was time to add a focal point to bring the piece together.  I combined Sizzix’s Tim Holtz – Feathered Wings die with Prima’s Sandra Evertson’s – Relics & Artifacts Heart and Flame. (did I mention that I love her stuff – and his too!)

Heart - supplies

After gluing the wing layers together, I painted a few coats of gesso on them.  Then I painted them using tips I had learned from Andy Skinner (Easy Rust Painting tutorials). First I painted the wings with Paynes Gray, then a coat of Quinacridone Gold.  I found it too light and a bit too yellow, so I sponged on some Transparent Red Iron Oxide.  To bring back some of the Paynes Gray; I gave the wings a wash of the gray watered down.  I hi-lighted the tips of the wings with Red Oxide because it is very opaque (I used Golden paints – my favourite).  I did the same for the flame, and I rubbed on some Inka Gold (yellow gold) on the tips of the flames and feathers for more layers and hi-lights.

Heart - closeup 1

For the heart, again using some of Andy Skinner’s tips, I painted on sand texture (pumice gel).  A layer of Payne’s Gray was painted before sponging on Quinacridone Gold. I love Ranger’s embossing powder “Brick” for rust effects, so I sponged on some embossing gel ink, sprinkled on the powder, and embossed it.  I was worried about using a heat gun on the paint – but it actually worked!  I found the powder too dull without enough texture, so I experimented again.  I put on a layer of Deco Media Ultra-Matte Varnish, sprinkled some Brick embossing powder over it.  After it dried, I painted on another layer of the matte varnish to seal the powder.

Heart - closeup 3                 Heart - full view

The pieces were arranged and glued down with Golden Extra Heavy Gel Medium – and it was done.  I loved how it turned out!  Thanks again for tuning in.

Val


Steampunk Lamp

By

Aug 24, 2015 3D Art, Altered Art, Industrial, Steampunk Comments are off

Hello again. Lately I  have found myself altering 3-d  pieces, much like this old simple white lamp that my hubby  asked me to “Steampunk” for him.  So, inspired to make something industrial, I transformed the lamp with gears, metal, and rust looking finish to make it my own Steampunk Lamp. Here are the before and after photos; and below you will find a few photos of the steps I took along the way.

Lamp - before Lamp - after

First I wrapped the lamp with metal foil tape that had been embossed with rivets (Sizzix Texture Fades), then painted it with black paint (Ranger – Distress Paint). To give the lamp some  dimension, I cut out gears and sprockets. Since the Spellbinders Sprockets are thinner, I glued 4 together that had been cut from 130 lb. card stock. The Sizzix Bigz Gears Die were cut from Grunge board, so one layer was thick enough. After gluing those onto the lamp, I rubbed a variety of Inka Gold to give it a metal/rusty look. I finished it off with a few coats of Workable Fixative to seal the Inka Gold and painted surface.  My hubby added his Edison Vintage light bulb, and now we have a working Steampunk Lamp!

Foil tape embossed with rivets

Foil tape embossed with rivets

Sprockets and Gears painted with black acrylic paint

Sprockets and Gears painted with black acrylic paint

Inka Gold rubbed onto lamp base

Inka Gold rubbed onto lamp base

Close up of front of lamp

Close up of front of lamp

Close up of lamp

Close up of top of lamp

Finished lamp

Finished lamp

Have a great day! Hope you enjoyed my piece.


First things first…!

By

Jul 20, 2015 3D Art Comments are off

The “Wheel”…

I have been doing lots of planning and organizing – and most importantly creating – to start up my blog. Recently I have been inspired by Finnibair’s style  after having taken her class last year. Wow – do I love this dimensional technique. I so wanted to do something more industrial/steampunk (with bolts and rust of course). While looking about for inspiration, I came across a fabulous blog dedicated to all things Vintage and Steampunk, Sandee and Amelie’s Steampunk Challenge. Loved the creativity I came across from their artists and followers, so I decided to enter their June contest as it fit in with the project I was planning. Well low and behold; I was honoured to receive “Top 5” for this piece…

The Wheel    the wheel detail

I called this “the wheel”. It’s done on a 8×8 wood panel. Gears and textured circles with gel medium on the base, covered with black gesso. The center piece is Tim Holtz Gadget Gears cut out of grunge board, building up layers to give it depth so that the screws and bolts could jut out from underneath. Then more small bolts and widgets are glued down with gel medium, graduating out the depth. All of it is covered with more black gesso before colouring with Prima Color Bloom, Silks Acrylic glaze, and Golden Acrylic paints; all to create a rust look. It was fun to create and I hope you like it.


Industrial Gears Window

By

May 13, 2016 3D Art, Altered Art, Brush, Mixed Media, Steampunk 0 Comments

Industrial Gears Window

I love all things industrial. Really enjoyed creating a picture for my wall from an old weathered window pane. Just added some gears, ropes, and pulleys to add a little industrial flare to this piece. I also distressed the three pictures (papers from Tim Holtz), before gluing them on.

Materials Used

  • Vintage Window Pane
  • Steampunk Scrapbook Paper
  • Tim Holtz Gears
  • Paint and Glue
  • Rope, Wheels, and Pulley

Brush and Bolt Logo

By

Jul 23, 2015 3D Art, Altered Art, Finnabair, Mixed Media 0 Comments

Finnabair Brush and Bolt Sign

Inspired by Finnabair’s style of art, I decided to play around a bit with making a “logo” for Brush & Bolt.  I wanted it to be 3-dimensional and incorporate our blue and brown colours. Of course the contradicting feminine brush and the masculine bolt aspect of this piece was appealing to me. I used real brushes and bolts and  coloured them with Prima Color Bloom, Silks Acrylic Glaze, and Jacquard Lumiere Paint.

Materials Used

  • Paint Brushes & Nuts and Bolts
  • Jacquard Lumiere Paint
  • Silks Acrylic Glaze
  • Prima Color Bloom

 

© Copyright BrushAndBolt.com